Getting Started

Turning On/Off:

Press the ON/OFF button down hard and hold for 3-5 seconds. It will vibrate for one second when turned on.


Standard toy levels:

Osci by Lovense button modes.


Charging

Turn off the device before charging. The cable can be plugged into any USB port or USB/AC power adapter to start charging. It will take approximately 70 minutes to fully charge.
The indicator light will stay on while charging. Once it is fully charged, the solid red light will turn off. If you're unsure whether it's fully charged, you can view the battery indicator in the app.

Note:

The magnetic charger will only work if positioned correctly. If a solid red light doesn’t turn on, rotate the cable 180 degrees. DO NOT use the toy while charging.


Osci by Lovense charging port.

Cleaning & Care

· Clean your device before and after each use.
· Clean with warm water and mild soap (or a sex toy cleaner).
· Dry thoroughly before storing.
· Keep away from extreme heat or cold.
· Make sure your toy is recharged at least once every six months.

Lubricant

To avoid any issues, only use water-based lube. DO NOT use silicone or oil-based lubricants. Before insertion, generously apply lube to the product and yourself. Water-based lube may dry out, so you should reapply as needed. We recommend using Lovense Water-Based Lubricant for the best experience.

Applying the water based lube on Osci by Lovense.

Usage Tip

·Put the toy on before you're aroused. Insert one testicle at a time, then carefully slip the penis through the ring.

·To prevent damage or bruising to the penis, a ring should not be worn for more than 30 minutes at a time.
·If pain is felt at any time, or if the genitals feel cold, the ring should be removed as soon as possible.
·If you have erectile dysfunction, a blood clotting disorder, any peripheral vascular or nerve disease, or are taking any blood -thinning medication, please check with your doctor before trying a cock ring.
·To reduce the toy’s sound in quiet areas, change your toy’s maximum vibration in the app.
·You can adjust the low, medium, and high levels to suit your needs.
·Once in the programming mode in our app, you can store up to 10 patterns (that you create) in Diamo.

We recommend inserting Osci by Lovense at around 45 degree angle.

Wearing Positions

App Download

Compatible with:

·iPhone/iPad Air/iPad Mini/iPod Touch iOS 10.0 and later
·Android 4.3 and later (with Bluetooth 4.0 enabled)
·Mac (with Bluetooth 4.0 enabled)
·Windows PC (needs a Lovense USB Bluetooth Adapter to connect You need a Lovense USB Bluetooth Adapter to connect Osci to a Windows PC.)

Any Lovense toy is compatible with iOS, Android devices, Mac computers, and Windows PC.

The Lovense Remote app icon. Lovense Remote Go to Download Page

Pairing with Your Devices

Pair with iOS/Android/Mac

  • 1. Press and hold Diamo's ON/OFF button to turn on the toy. A light will flash to indicate it's on and ready to pair.
  • 2. Click the Pairing Your Toy icon on the Lovense Remote app. icon.
  • 3. Tap "+" to begin searching. After the toy is found, tap "Done". The light will stay on to indicate it's connected. Your toy can now be controlled with your smartphone.
How to pair Osci with the Lovense Remote app on iOS/Android/Mac. How to pair Osci with the Lovense Remote app on iOS/Android/Mac. How to pair Osci with the Lovense Remote app on iOS/Android/Mac.

Note:

· You only have to pair your toy once. Next time it should automatically connect to your smartphone.
· This icon Icon that indicates your toy is paired with the Lovense Remote app. shows the signal of the connection. It will switch to this one Pairing Your Toy icon on the Lovense Remote app. if it disconnects. If paired, it will automatically reconnect.

Pair with PC

1. Press and hold Diamo's ON/OFF button to turn on the toy. A light will flash to indicate it's on.
2. Plug the Lovense USB Bluetooth Adapter into a free USB port on your computer.
3. Click the Pairing Your Toy icon on the Lovense Remote app. icon.
4. Tap "+" to begin searching. After toy is found, tap "Done". The light will stay on to indicate it's connected. Your toy can now be controlled with your PC.

How to pair Osci with the Lovense Remote app on iOS/Android/Mac. How to pair Osci with the Lovense Remote app on Windows PC. How to pair Osci with the Lovense Remote app on Windows PC.

How To Program

  • 1. After successfully pairing Diamo to your phone, tap on the Diamo panel in the My Toys section.
  • 2. Tap "Program" button to see the programming options.
  • 3. Tap "Adjust Levels" to adjust the first three levels.
  • 4. Tap "Create New Pattern" to add a preset pattern onto Diamo.
  • The Lovense Remote app allows you to choose a power level to match your body's needs and save it for a later use.

Troubleshooting

For a better experience, we suggest you upgrade your browser or using other browser.

OK
Loading...
Are you sure?

 

Login
     Forgot Password?
  Login

This order has been cancelled.

We will initiate a refund that should reach you within 7-10 working days.

OK

This order has already been shipped out. You can’t cancel it now. Please contact us for further assistance.